Valve bodies
Cross-bores connect a port to its seat and stem guide. The intersection must remain accessible for finishing and cleaning.
Cross-bores connect a port to its seat and stem guide. The intersection must remain accessible for finishing and cleaning.
A turned stem combines a sealing or packing track with threads and driving flats. Its final surfaces are located from the working axis.
A nozzle relates an orifice to its mounting thread or flange. Entry shape and the internal transition are distinct from the outside envelope.
A pilot and seating face locate the adapter before the bolts clamp it. Each face retains its own gasket or mounting requirement.
We machine concentric bores and outer seats with the specified end locations. Thin radial sections need support through the finishing sequence.
Connected ports, mounting holes and service access are machined from a defined block layout. Thread standard and passage closure remain explicit.
We quote custom milled and turned Hastelloy components, including valve bodies, sleeves, nozzles and equipment interfaces. C-276 and C-22 are corrosion-resistant nickel alloys with different chemistries; the specified grade remains tied to the fluid, temperature and component design.
C-276 is a nickel-chromium-molybdenum alloy containing tungsten. Haynes documents broad corrosion behavior, including reducing media; selection still depends on the actual chemical concentration and temperature.[1]
C-22 has more nominal chromium and less molybdenum than C-276. Its corrosion balance differs, particularly across oxidizing environments, so it is not a higher-number substitute by default.[2] [1]
The incoming product form and condition set the machining basis. Welding or another subsequent thermal process can create a different finished condition requiring its own acceptance.[3]
A turned sleeve may use bar or tube; a multi-port body may use plate or a forging. Starting stock must leave material around the connected bores and sealing faces.


A chemical-resistance chart has specified solution chemistry, concentration and temperature. Contamination, mixed media, crevices and flow can change the result. The drawing authority’s selected material and service requirements define the ordered component.[1] [4]
Haynes C-276 and C-22 data below compare named alloy references; chemistry is nominal, not a purchase certificate.
| Property | C-276 | C-22 | Basis |
|---|---|---|---|
| UNS identity | N10276 | N06022 | Wrought alloy designation |
| Density | 8.89 g/cm³ | 8.69 g/cm³ | Room temperature |
| Chromium | 16% | 22% | Nominal weight composition |
| Molybdenum | 16% | 13% | Nominal weight composition |
| Tungsten | 4% | 3% | Nominal weight composition |
| Thermal conductivity | 10.5 W/(m·K) | 10.1 W/(m·K) | 50 °C |
| Electrical resistivity | 1.23 µΩ·m | 1.14 µΩ·m | Room temperature |
Haynes International C-276 and C-22 alloy pages. Composition values are nominal, not heat-analysis limits. Chemical suitability follows the actual medium and conditions, and a pressure or corrosion rating for the finished part is set on that basis.
Nickel alloys can work-harden under rubbing. Tool condition, rigidity and a cutting route that avoids repeated rubbing matter more than transferring a stainless-steel cycle unchanged.
A deep bore limits tool reach; a thin sleeve limits support. The final bore, outer seat and end face are planned around those different access constraints.
A finished outside surface does not reveal a burr at a cross-port. Passage access and removal of loose chips are part of the component route.
Drawing geometry, material condition and the agreed test scope define separate acceptance items.
| Feature | Requirement or reference | Accepted condition | Verification |
|---|---|---|---|
| Valve seat and guide | Drawing alignment and surface limits | After final finishing | Datum-based geometry check |
| Port connection | Drawing thread and sealing arrangement | Finished component | Thread and seat checks |
| Material identity | Ordered UNS/product specification | Traceable delivered stock | Agreed material record |
| Containment | Specified pressure/leak method and limits | Defined test assembly | Separately scoped test |
The material specification, dimensional drawing and application test plan define different acceptance requirements.
We quote the specified seats, datums and connected features. Leakage, pressure and corrosion acceptance require their own defined conditions and records.
A narrow opening can prevent a tool from reaching the sealing profile. A separate insert or accessible service face may provide another manufacturable arrangement.
A close overlap or trapped pocket changes the local fluid environment. Corrosion-resistant stock cannot remove a design crevice from the assembled part.
A cross-hole can reduce the wall beneath a threaded port. The design must retain the required section around both features, including their final thread roots.
A supplied blank needs its material identity, condition and machining allowance preserved. A certificate does not show whether the actual blank contains enough stock to establish the required datums.
Stems, seats and retained rings interact through both contact and fluid exposure. The assembly’s selected material pairing can matter as much as the individual alloy name.
Port layout must leave access for gauges, tubing and assembly tools. An accurately located port that is inaccessible after installation still creates a service problem.
The shaft fit, working surface and retained hardware define the sleeve. A material change does not by itself correct misalignment or an unsuitable seal arrangement.
An adapter joins different equipment interfaces. The chosen gasket, bolts and neighboring materials remain part of the complete corrosion and containment design.
The required texture is applied to the actual sealing land. Polishing unrelated faces does not improve the geometry under the gasket.
Internal edge work is directed at the accessible passage intersections. External edge rounding cannot stand in for clearing a trapped internal burr.
Where welding or treatment is included, the route identifies its responsible provider and final acceptance. It is not assumed to occur in the same operation as CNC machining.
Cleaning and packing follow the agreed contamination limits. Open ports are protected from loose debris and the working seat from metal-to-metal contact in transit.
The order retains UNS grade, product form and condition. A similar-looking nickel alloy cannot be accepted from appearance or a generic Hastelloy label.
We check the drawing’s datums, port locations and working surfaces. A material certificate does not provide those geometric results.
Pressure, leakage, corrosion or nondestructive testing has its own method and acceptance limit. Its inclusion and responsible testing site are defined separately.
Nickel-alloy blanks and large internal openings can make material utilization significant. The chosen product form changes how much stock must be removed.
Work-hardening behavior, deep access and multiple port directions affect the route. A small overall part can still contain a demanding internal feature.
A recorded seat relationship or a separate pressure test adds defined work. The quote distinguishes that scope from ordinary external finishing.
Setup, tooling preparation and first-part inspection are shared within one released geometry. Changing the alloy or seat design creates a different manufacturing basis.
The initial component checks seat access, hardware engagement and installation. Geometric changes are resolved before production release.
Machining and service behaviour of C-276 or C-22 are judged on parts made in those alloys. The representative acceptance part uses the ordered material basis.
The released part includes its specified finishing and tests. Records identify which results apply to machining and which to a later specialist process.
Repeat orders retain the accepted alloy and geometry. A new fluid or mating material is a service-design change, not an automatic repeat approval.
No. Both names cover nickel-alloy families, but the grades have different compositions and uses. A specification for C-276 cannot be replaced with Inconel 625 or Inconel 718 on the basis of the nickel content alone.
No. In its ASTM G48 reference for acidified 6 wt.% ferric chloride over 72 hours, Haynes lists a critical pitting temperature above 150 °C and a critical crevice temperature of 55 °C for C-276. Use a separate crevice-corrosion basis for a confined gasket joint.
A mill analysis and an identification check answer different questions. An identification result must use a method able to distinguish the required grade, while the ordered certificate and traceability remain separate records.
A cast product has its own applicable specification and condition. The wrought UNS designation and wrought stock data should not be used to approve a casting without resolving that product requirement.
Not as a routine substitution. Haynes warns that intermediate stress-relief temperatures used for steels can precipitate unwanted phases in its solid-solution nickel alloys and impair corrosion resistance. Its C-276 welding data specifically rejects stress relief around 650 °C. Any required postweld treatment must follow the alloy-specific route before final machining and acceptance.
No. Haynes constructs its 0.1 mm/year lines from laboratory tests in reagent-grade acids at stated concentrations and temperatures. The curve is a material-selection input; the actual valve's exposure, crevices, flow conditions and design allowance come from its operating basis. It is a material-selection input; service suitability requires the actual operating basis.
Send the component drawing, alloy and product specification, quantity and final condition. Include the sealing interfaces, material records and any pressure, leak or other specialist acceptance required with the parts.
Haynes alloy identity, nominal composition and physical data; machining and acceptance scope remain component-specific.
We use Google Analytics to see how this site is used. Analytics cookies are set only if you accept. Privacy Policy