Prepare your first RFQ
What to Include in a CNC Machining RFQ
Prepare your drawings, material specification, quantities, finishing and inspection requirements for a clear CNC machining quotation.
Read the RFQ guide
CNC Machining
Knowledge Center
CNC guides by topic
Preparing your first CNC machining RFQ?
Prepare your first RFQ
Explore the machining guides
Anodizing Cost for CNC Aluminum Parts: What Changes the Quote
Understand what changes an aluminum anodizing quote, from rack capacity and finish type to masking, appearance and finished-fit inspection.
CNC Drilling vs. CNC Boring: When to Add a Finishing Pass
Drilling makes an opening; boring enlarges or finishes an existing one. Decide when a drilled hole is done, when boring adds value, and when reaming or spot-facing is the better step.
CNC Machining Lead Times: What Determines the Ship Date
A CNC ship date depends on material, capacity, machining, finishing and inspection. Follow a worked schedule to separate waiting from cutting and compare lead-time quotes on the same basis.
Cast Aluminum vs. Machined Aluminum: Compare the Finished Part
Cast aluminum and machined aluminum are not opposite choices. Compare a specified casting with a wrought-stock part by material evidence, critical interfaces, integrity, finish and accepted-part cost.
Brushed Surface Finish on CNC Parts: Specs, Limits and Cost
Specify a brushed finish by treated faces, grain direction, a representative sample and separate functional checks. Learn where abrasive finishing affects geometry and quote scope.
Boring vs. Turning: Inside and Outside Cuts on a CNC Part
On a lathe, external turning shapes the outside while boring finishes an existing inside opening. See when a starter hole, bar clearance and separate OD/ID inspection matter.
No guides match this search
Try a broader term, such as drawings, materials, machining or cost. You can also clear the topic filter.
Show all guides